We are DIPHENYL(2,4,6-TRIMETHYLBENZOYL)PHOSPHINE OXIDE CAS:75980-60-8 manufacturer and supplier in China, Pls send inquiry of to info@nbinno.com of visit www.nbinno.com our official website should you have any interests

diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide cas 75980-60-8

Assay: ≥99%

Appearance: yellowish crystal or powder

Capacity: 100 MT per month

Packaging: 20 kg carton

Sample: available

Category: Other

• Description

Description

Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide Quick Details

Chemical Name: Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide

CAS No.: 75980-60-8

Molecular Formula: C22H21O2P

Chemical Structure:

Molecular weight:348.37

Appearance:Yellowish green crystal

Assay：99%

Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide Typical Properties

Items	Specifications
Appearance	Yellowish green crystal
Assay	≥99.0%
Melting Point	91.0～95.0℃
Loss on Drying	≤0.2%
Ash	≤0.1%
Acidity value	≤0.5mgKOH/g

Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide Usage

1. Photoinitiators, mainly used for screen printing inks, lithographic printing inks, flexo printing inks, wood coatings.

2. Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide is an efficient free radical (1) photoinitiator with absorption in a long wavelength range. Because of its wide absorption range, its effective absorption peak is 350-400 nm, and it always absorbs about 420 nm. Its absorption peak is longer than that of the conventional initiator. After irradiation, two free radicals, benzoyl and phosphatidyl, can be formed, which can initiate polymerization. Therefore, the photo-curing speed is fast. It also has the function ofphotobleaching,and is suitable for deep curing of thick film and yellow-stable coating. Low volatility, suitable for water-based. This product is mostly used in white system. It can be used in ultraviolet curing coatings, printing ink, ultraviolet curing adhesives, optical fiber coatings, photoresist, photopolymer plate, stereolithographic resin, composite materials, dental fillers, etc. The dosage of this product should be 0.5-4% w/w according to the results of actual experiments.

3.Be sure to keep and use away from light. It can be completely cured on the pigmented surface of white or high titanium dioxide. The coating does not yellowing, low post-polymerization effect and no residue. It can also be used for transparent coatings, especially for products with low odor requirements. It has high initiation efficiency when used alone in unsaturated polyester containing styrene system. Acrylate systems, especially colored systems, usually need to be used in combination with amine or acrylamide, and other photoinitiators to achieve complete curing of the system, especially for low yellowing, white systemsandthick film curing. Silk printing ink, lithographic printing ink, flexo printing inkandwood coating. The recommended dosage is 0.5-3.0% (colored system) and 0.3-2.0% (transparent system).

Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide Packaging and Shipping

Drum，25kg

Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide Storage

Keep the seal and keep it under low temperature and dry condition.

Related Products:3-(1,1-dioxido-4H-1,2,4-benzothiadiazin-3-yl)-4-hydroxy-1-[(5-nitro-2-furyl)methyl]-1,8-naphthyridin-2(1H)-one manufacturer | [S-Se]OT supplier | Poly[imino(1,4-dioxo-1,4-butanediyl)iminomethylene-1,3-phenylenemethylene] producer.